Skip to content

Issues getting Flarum to work on new host

Solved Configure
65 4 29.6k 1
  • @phenomlab do i need to update the subdomain at Nginx config files? i have seen IP there

    wrote on last edited by
    #42

    @Hari No. Leave that as is

  • @phenomlab thanks, daily upvote limit reched

    wrote on last edited by
    #43

    @Hari said in Issues getting Flarum to work on new host:

    daily upvote limit reched

    Should be resolved now. Try upvoting again (same for @crazycells)

  • @Hari No. Leave that as is

    wrote on last edited by
    #44

    @phenomlab ok, i have checked gt matrix looks like response time is very slow how can i increase it?

  • @Hari said in Issues getting Flarum to work on new host:

    daily upvote limit reched

    Should be resolved now. Try upvoting again (same for @crazycells)

    wrote on last edited by
    #45

    @phenomlab i am seeing upvote limit is 10 still could not upvote

  • @phenomlab ok, i have checked gt matrix looks like response time is very slow how can i increase it?

    wrote on last edited by
    #46

    @Hari As you are running this domain through CF, you should enable the caching and protection there. At the moment, you are pointing to the server directly.

  • @phenomlab i am seeing upvote limit is 10 still could not upvote

    wrote on last edited by
    #47

    @Hari Let me check

  • @phenomlab i am seeing upvote limit is 10 still could not upvote

    wrote on last edited by
    #48

    @Hari said in Issues getting Flarum to work on new host:

    i am seeing upvote limit is 10 still could not upvote

    Try now

  • @Hari said in Issues getting Flarum to work on new host:

    i am seeing upvote limit is 10 still could not upvote

    Try now

    wrote on last edited by
    #49

    @phenomlab still same

  • @phenomlab still same

    wrote on last edited by
    #50

    @Hari Seems the max value is hard coded, so you’ll have to wait until tomorrow 😄

  • @Hari Seems the max value is hard coded, so you’ll have to wait until tomorrow 😄

    wrote on last edited by
    #51

    @phenomlab sure, i have enabled CF cache but the response time is still slow should i enable redis cache ?

  • Hari Hari has marked this topic as solved on
  • @phenomlab sure, i have enabled CF cache but the response time is still slow should i enable redis cache ?

    wrote on last edited by
    #52

    @Hari Redis cache isn’t the “saviour” everyone thinks it is - most of files and assets required to access the site initially will be served from the CF edge networks, although CF won’t have any impact on the database.

    Something like Flarum’s ReCache is suggested here - I know that the developer of this product has since left the Flarum team, so I’m not sure if this is still an active product.

  • @Hari Redis cache isn’t the “saviour” everyone thinks it is - most of files and assets required to access the site initially will be served from the CF edge networks, although CF won’t have any impact on the database.

    Something like Flarum’s ReCache is suggested here - I know that the developer of this product has since left the Flarum team, so I’m not sure if this is still an active product.

    wrote on last edited by
    #53
  • @Hari Redis cache isn’t the “saviour” everyone thinks it is - most of files and assets required to access the site initially will be served from the CF edge networks, although CF won’t have any impact on the database.

    Something like Flarum’s ReCache is suggested here - I know that the developer of this product has since left the Flarum team, so I’m not sure if this is still an active product.

    wrote on last edited by Hari
    #54
  • wrote on last edited by
    #55

    @Hari its working without adding this lines

  • wrote on last edited by
    #56

    @Hari You need to add this to the Flarum .nginx.conf file, like the below

    location / {
    	try_files $uri $uri/ /index.php?$query_string;
    }
    location = /sitemap.xml {
        try_files $uri $uri/ /index.php?$query_string;
    }
    

    So just outside of the default location / block

  • @Hari You need to add this to the Flarum .nginx.conf file, like the below

    location / {
    	try_files $uri $uri/ /index.php?$query_string;
    }
    location = /sitemap.xml {
        try_files $uri $uri/ /index.php?$query_string;
    }
    

    So just outside of the default location / block

    wrote on last edited by Hari
    #57

    @phenomlab for now sitemap is loading should i still add these lines in nginx? (thinking to ignore adding these)

    i rebooted the server and the composer is not found

    should i need to install composer again?

    cd /home/ask/public_html

    [root@ask public_html]# composer require fof/best-answer:"*"
    sh: 1: composer: not found
    [root@ask public_html]# composer require fof/best-answer:"*"
    sh: 1: composer: not found
    [root@ask public_html]# locate composer
    [root@ask public_html]#
    
  • @phenomlab for now sitemap is loading should i still add these lines in nginx? (thinking to ignore adding these)

    i rebooted the server and the composer is not found

    should i need to install composer again?

    cd /home/ask/public_html

    [root@ask public_html]# composer require fof/best-answer:"*"
    sh: 1: composer: not found
    [root@ask public_html]# composer require fof/best-answer:"*"
    sh: 1: composer: not found
    [root@ask public_html]# locate composer
    [root@ask public_html]#
    
    wrote on last edited by phenomlab
    #58

    @Hari Seems to work fine for me ?

    fa9f306f-4384-44ff-9485-cb2fb66d9890-image.png

    c081e43b-2963-4c64-a18f-3f90d90c7c97-image.png

  • @Hari Seems to work fine for me ?

    fa9f306f-4384-44ff-9485-cb2fb66d9890-image.png

    c081e43b-2963-4c64-a18f-3f90d90c7c97-image.png

    wrote on last edited by Hari
    #59

    @phenomlab sir, which terminal are you using?

    i just realized there was a special character when i was trying earlier

  • @phenomlab sir, which terminal are you using?

    i just realized there was a special character when i was trying earlier

    wrote on last edited by
    #60

    @Hari I use the basic Windows CMD or Bash Shell depending on the OS I boot into.

  • @Hari I use the basic Windows CMD or Bash Shell depending on the OS I boot into.

    wrote on last edited by
    #61

Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • Upgrade issues

    Solved Configure nodebb
    2
    1
    2 Votes
    2 Posts
    1k Views
    DownPW
    Use this code git fetch # Grab the latest code from the NodeBB repository git checkout v3.x git reset --hard origin/v3.x And you will have the latest version without specifying it https://docs.nodebb.org/configuring/upgrade/
  • NodeBB: Favicon upload issue

    Solved Configure nodebb favicon
    12
    1
    3 Votes
    12 Posts
    4k Views
    mventures
    @phenomlab I am on a Mac, so I used the “Option + Command + I”, and then performed the steps. It loaded my favicon! I checked on Firefox which I haven’t used before, and it showed my favicon also! That’s fantastic and thank you for the help!
  • MailGun Not Working NodeBB

    Solved Configure mail mailgun
    6
    1 Votes
    6 Posts
    2k Views
    cagatay
    @phenomlab did it i did not create smtp user on mailgun. everything is working now. [image: 6cc6061f-ed5d-41f6-8eb7-5d98f98b3706-image.png]
  • auto create flarum new discussions in wordpress

    Configure flarum wordpress
    2
    1 Votes
    2 Posts
    1k Views
    phenomlab
    @Hari I think you’re referring to this https://sudonix.com/topic/170/creating-posts-from-rss-feeds-in-flarum However, this code was never designed to work with WordPress, but you could leverage the WP-CLI to do something similar without too much effort.
  • Virtualmin Setup DigitalOcean

    Solved Customisation virtualmin digitalocean
    26
    9 Votes
    26 Posts
    13k Views
    phenomlab
    @Hari said in Virtualmin Setup DigitalOcean: i have felt it is very hard to manage Virtualmin the settings are confusing It’s a bit of a learning curve, admittedly, but very powerful and easy to use provided you understand the implications of what you are doing. For example, moving a VirtualMin server to subserver and then back again without changing underlying components that rely on the correct placement of the server, of course it will no longer work.
  • SSl expired on virtualmin

    Solved Configure virtualmin ubun server ssl
    18
    3 Votes
    18 Posts
    7k Views
    phenomlab
    @justoverclock Not necessarily. You only need to use this if it fails from the Virtualmin window
  • Email issue (virturalmin)

    Solved Hosting virtualmin
    5
    0 Votes
    5 Posts
    2k Views
    JAC
    @gotwf said in Email issue (virturalmin): @jac Typically you want your domain’s MX records to point to FQDN server name, e.g. foo.example.eg % drill stockportcounty.fans mx ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 63911 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; stockportcounty.fans. IN MX ;; ANSWER SECTION: stockportcounty.fans. 600 IN MX 10 stockportcounty.fans. Yours do not. Although a bit more drillin’ and reverse lookup indicates thusly; % drill stockportcounty.fans ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 160 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; stockportcounty.fans. IN A ;; ANSWER SECTION: stockportcounty.fans. 600 IN A 65.108.63.35 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 127 msec ;; SERVER: 204.8.232.207 ;; WHEN: Sun Oct 10 19:37:02 2021 ;; MSG SIZE rcvd: 54 <kvg@loon:~>% drill -x 65.108.63.35 ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 57802 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; 35.63.108.65.in-addr.arpa. IN PTR ;; ANSWER SECTION: 35.63.108.65.in-addr.arpa. 86400 IN PTR vps.stockportcounty.fans. I think you probably want your mx record to point to vps.stockportcountry.fans. It is important for forward and reverse lookups for MX records jive. Maybe you are looking like a spammer in that they do not? Edit: But at least you have a reverse record, many spammers do not, so that is a big red flag. Thanks for the advice, will look into it all later once back home.
  • help me configuring cron job for fof/sitemap - flarum

    Solved Configure
    36
    18 Votes
    36 Posts
    13k Views
    DownPW
    you are too fast