Skip to content

Nodebb 3.2.0

Bugs
20 4 6.8k 2
  • wrote on last edited by
    #3

    i think my css codes should be cleared.
    vote area not working for example as for the first post.
    and that photo was taken by andorid phone.

  • i think my css codes should be cleared.
    vote area not working for example as for the first post.
    and that photo was taken by andorid phone.

    wrote on last edited by
    #4

    @cagatay In the console, I see Adding required classes for messenger type view which would have been a modified class that referred to the messenger type view I created for 1.x of the NodeBB software. As previously stated, it’s not valid for 3.x so will need to be removed.

    I’ll login to your site now and take a look.

  • @cagatay In the console, I see Adding required classes for messenger type view which would have been a modified class that referred to the messenger type view I created for 1.x of the NodeBB software. As previously stated, it’s not valid for 3.x so will need to be removed.

    I’ll login to your site now and take a look.

    wrote on last edited by cagatay
    #5

    @phenomlab thank you for your prompt response.

  • @phenomlab thank you for your prompt response.

    wrote on last edited by
    #6

    @cagatay No problem. Reload your site and test.

  • wrote on last edited by
    #7

    yes, everything is okey now, but changed my icon for upvote and downvote 🙂

  • yes, everything is okey now, but changed my icon for upvote and downvote 🙂

    wrote on last edited by
    #8

    @cagatay Yes, you’ll need to set those back to what you want them to be.

    I had to remove all of your CSS, and replace it with a working copy I have. This issue stems from new classes and viewports being introduced in 3.2.0 and because you had overriding classes from the previous 1.x version, it caused the issues you were experiencing.

    The upside of this is that this CSS code is bleeding edge - the downside is that any customisations you made will need to be put back.

  • wrote on last edited by
    #9

    thank you Mark.

  • wrote on last edited by
    #10
    This post is deleted!
  • wrote on last edited by
    #11

    For my part, since I upgraded to 3.2.0, the page takes longer to load than before and I see this socket error :

    ba99dc1a-ba4a-4b23-ace0-6cf17975439f-image.png

  • For my part, since I upgraded to 3.2.0, the page takes longer to load than before and I see this socket error :

    ba99dc1a-ba4a-4b23-ace0-6cf17975439f-image.png

    wrote on last edited by
    #12

    @DownPW can you try disabling Cloudflare and let me know if that resolves the issue?

  • wrote on last edited by DownPW
    #13

    @phenomlab

    If is here, already disable.

    image.png

    Same in incognito

    if i disable OGproxy (ACP/custom JS), it’s better (more fast) but I have the error.

  • @phenomlab

    If is here, already disable.

    image.png

    Same in incognito

    if i disable OGproxy (ACP/custom JS), it’s better (more fast) but I have the error.

    wrote on last edited by
    #14

    @DownPW OGProxy has no bearing on sockets. The only thing that could possibly slow down a reverse proxy is a slow DNS lookup. What happens if you change the DNS to (for example) 8.8.8.8 or 1.1.1.1 ?

    Do you have any firewall device in between the internet and your server?

  • wrote on last edited by DownPW
    #15

    @phenomlab

    hmmm no and no. I have test on 2 diffèrent physical site (home and work)
    Since upgrade, I haven’t constated this.

    I haven’t this error on my VM in local (no domain)
    I have deactivate proxied on DNS entry on Cloudflare = same

  • @phenomlab

    hmmm no and no. I have test on 2 diffèrent physical site (home and work)
    Since upgrade, I haven’t constated this.

    I haven’t this error on my VM in local (no domain)
    I have deactivate proxied on DNS entry on Cloudflare = same

    wrote on last edited by
    #16

    @DownPW I’ll have a look at this tomorrow. I assume this is your Dev server?

  • wrote on last edited by
    #17

    Yes dev serv

  • @phenomlab

    hmmm no and no. I have test on 2 diffèrent physical site (home and work)
    Since upgrade, I haven’t constated this.

    I haven’t this error on my VM in local (no domain)
    I have deactivate proxied on DNS entry on Cloudflare = same

    wrote on last edited by
    #18

    @DownPW Just checked your site this morning. I see no slowness at all, and there are no socket errors for me 🙂

  • wrote on last edited by
    #19

    hi @phenomlab , I think there is a bug on /groups page, “verified” group looks weird.

    https://sudonix.org/groups

  • hi @phenomlab , I think there is a bug on /groups page, “verified” group looks weird.

    https://sudonix.org/groups

    wrote on last edited by phenomlab
    #20

    @crazycells yes, I’m aware of that. Need to fix

    EDIT- fixed. Caused by the same CSS that is used to absolutely position the “verified” group badge in the posts view. Amended this CSS so that is specifically targets the post stream as below

        li[component="post"] a[href*="/groups/verified"] {
            position: absolute !important;
            left: 8px;
            z-index: 2;
            margin-top: 1px;
            border-radius: 999px !important;
            line-height: 14px;
            display: block;
            height: 22px;
            margin-left: 0px !important;
        }
    

Related Topics
  • nodebb error logs

    Bugs nodebb
    6
    2
    4 Votes
    6 Posts
    2k Views
    ahmed
    I just wanted to ask because I don’t have much knowledge about the new installation. Thank you for the explanatory answer.
  • Nodebb icon on google page

    Solved Customisation nodebb
    9
    1
    4 Votes
    9 Posts
    4k Views
    phenomlab
    @Panda It’s been raised multiple times, but only for the open source version, and not hosted.
  • Nodebb 3.2.2

    Bugs nodebb 3.2.2
    27
    1
    11 Votes
    27 Posts
    11k Views
    phenomlab
    @crazycells yes, I’ve just seen that and modified the post. It seems to only happen if you have a space between the “greater than” symbol and the actual text. Clearly a markdown thing.
  • Nodebb design

    Solved General nodebb
    2
    1 Votes
    2 Posts
    1k Views
    phenomlab
    @Panda said in Nodebb design: One negative is not being so good for SEO as more Server side rendered forums, if web crawlers dont run the JS to read the forum. From recollection, Google and Bing have the capability to read and process JS, although it’s not in the same manner as a physical person will consume content on a page. It will be seen as plain text, but will be indexed. However, it’s important to note that Yandex and Baidu will not render JS, although seeing as Google has a 90% share of the content available on the web in terms of indexing, this isn’t something you’ll likely lose sleep over. @Panda said in Nodebb design: The “write api” is preferred for server-to-server interactions. This is mostly based around overall security - you won’t typically want a client machine changing database elements or altering data. This is why you have “client-side” which could be DOM manipulation etc, and “server-side” which performs more complex operations as it can communicate directly with the database whereas the client cannot (and if it can, then you have a serious security flaw). Reading from the API is perfectly acceptable on the client-side, but not being able to write. A paradigm here would be something like SNMP. This protocol exists as a UDP (UDP is very efficient, as it is “fire and forget” and does not wait for a response like TCP does) based service which reads performance data from a remote source, thus enabling an application to parse that data for use in a monitoring application. In all cases, SNMP access should be “RO” (Read Only) and not RW (Read Write). It is completely feasible to assume complete control over a firewall for example by having RW access to SNMP and then exposing it to the entire internet with a weak passphrase. You wouldn’t do it (at least, I hope you wouldn’t) and the same ethic applies to server-side rendering and the execution of commands.
  • NodeBB upgrade now cant post

    Solved Bugs nodebb
    5
    2 Votes
    5 Posts
    2k Views
    phenomlab
    @Panda yes, for some reason, that is the case. If you need an urgent response, it’s probably better to post here because of the time difference.
  • NodeBB v3

    Announcements nodebb v3 nodebb
    2
    3 Votes
    2 Posts
    1k Views
    phenomlab
    @cagatay JS will work fine - no changes there, and there are no plans to drop support for jQuery. More of an issue is the CSS - for which there are quite a few breaking changes. Keep an eye on sudonix.dev (my development site) where you can see progress in relation to how I am tackling the compatibility issues.
  • [NodeBB] greeting message

    Solved Customisation css nodebb javascript
    2
    1
    3 Votes
    2 Posts
    2k Views
    phenomlab
    @pwsincd welcome to sudonix, and thanks for the comments. What your looking for is here https://sudonix.com/topic/195/nodebb-welcome-message/3?_=1648295651358
  • Social icon (Nodebb)

    Solved Customisation nodebb social
    7
    0 Votes
    7 Posts
    3k Views
    JAC
    @phenomlab said in Social icon (Nodebb): @jac I just tested my theory around using the OG image, and according to the Twitter card validator, it works fine [image: 73e805e1-997b-41bf-9259-51c5052ca8fc-image.png] fixed