Skip to content

Custom badges

Solved Customisation
103 4 60.2k 2
  • @phenomlab lol verified badge changed here as well 🙂

    is there an easy CSS code to make it look more like a flower, rather than perfectly round? (just like the Twitter one)

    wrote on last edited by
    #24

    @crazycells it’s possible, but would be very complex. Much less hassle to use either a direct image (which probably won’t look very good on scale) or use this SVG from Font Awesome which appears to be free 👍

    https://fontawesomeicons.com/svg/icons/twitter-verified-badge

  • @crazycells it’s possible, but would be very complex. Much less hassle to use either a direct image (which probably won’t look very good on scale) or use this SVG from Font Awesome which appears to be free 👍

    https://fontawesomeicons.com/svg/icons/twitter-verified-badge

    wrote on last edited by
    #25

    @phenomlab thanks.

  • @crazycells it’s possible, but would be very complex. Much less hassle to use either a direct image (which probably won’t look very good on scale) or use this SVG from Font Awesome which appears to be free 👍

    https://fontawesomeicons.com/svg/icons/twitter-verified-badge

    wrote on last edited by
    #26

    @phenomlab since both admin and global moderator badges are close to purple/maroon color, you can change one to green (which I believe was the verified badge color)

  • @phenomlab since both admin and global moderator badges are close to purple/maroon color, you can change one to green (which I believe was the verified badge color)

    wrote on last edited by
    #27

    @crazycells yes, I need to change that here. Was switched out on a whim.

  • @crazycells yes, I need to change that here. Was switched out on a whim.

    wrote on last edited by
    #28

    @crazycells @DownPW something of a “fresher” approach. Have a look at the below

    5602e864-6de6-4a09-9dd1-eb33b2807774-image.png

    Using the messenger type view I created, it then becomes possible to place the “verified” group according to the style from the same view.

    This does mean some new CSS

    .self-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        right: 51px;
        top: 44px;
    }
    .topic-response-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        left: 20px;
        top: 44px;
    }
    .topic-response-post i[component="user/status"] {
        position: absolute;
        left: -1px;
    }
    

    And, more importantly, I found a more efficient way of adding classes in the messenger view js. The revised code is below

    // Target those elements already loaded in the DOM
    $(document).ready(function() {
        $(window).on('action:ajaxify.end', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    // Target elements dynamically added to the DOM on post load
    $(document).ready(function() {
        $(window).on('action:ajaxify.loaded', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    
  • @crazycells @DownPW something of a “fresher” approach. Have a look at the below

    5602e864-6de6-4a09-9dd1-eb33b2807774-image.png

    Using the messenger type view I created, it then becomes possible to place the “verified” group according to the style from the same view.

    This does mean some new CSS

    .self-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        right: 51px;
        top: 44px;
    }
    .topic-response-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        left: 20px;
        top: 44px;
    }
    .topic-response-post i[component="user/status"] {
        position: absolute;
        left: -1px;
    }
    

    And, more importantly, I found a more efficient way of adding classes in the messenger view js. The revised code is below

    // Target those elements already loaded in the DOM
    $(document).ready(function() {
        $(window).on('action:ajaxify.end', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    // Target elements dynamically added to the DOM on post load
    $(document).ready(function() {
        $(window).on('action:ajaxify.loaded', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    
    wrote on last edited by
    #29

    @phenomlab this looks cooler than usual badges 👍 thanks for the codes…

    but, I believe it should be located slightly lower since there is already a status circle that is taking some space from the avatar, and now this is taking more 🙂 it feels like you are conversing with someone that has sunglasses, a scarf, and a hat 😄 I prefer to see their faces more clearly (well, in this case avatar 😄 )

  • @phenomlab this looks cooler than usual badges 👍 thanks for the codes…

    but, I believe it should be located slightly lower since there is already a status circle that is taking some space from the avatar, and now this is taking more 🙂 it feels like you are conversing with someone that has sunglasses, a scarf, and a hat 😄 I prefer to see their faces more clearly (well, in this case avatar 😄 )

    wrote on last edited by
    #30

    @crazycells ha! Yes, I see your point. I guess it’s down to taste, and thanks to the absolute positioning, you can easily customise to suit taste.

    It’s also worth noting that on here at least, this will only trigger on larger monitors - it would look awful on mobile devices in my view.

  • @crazycells ha! Yes, I see your point. I guess it’s down to taste, and thanks to the absolute positioning, you can easily customise to suit taste.

    It’s also worth noting that on here at least, this will only trigger on larger monitors - it would look awful on mobile devices in my view.

    wrote on last edited by
    #31

    @phenomlab yes 😄 I agree with you.

    How do you achieve the restriction? I cannot see any screen resolution definition…

  • @crazycells ha! Yes, I see your point. I guess it’s down to taste, and thanks to the absolute positioning, you can easily customise to suit taste.

    It’s also worth noting that on here at least, this will only trigger on larger monitors - it would look awful on mobile devices in my view.

    wrote on last edited by
    #32

    @phenomlab oh, I think I got it. that is a general property for all group badges?

    I do not see any of them on mobile…

  • @phenomlab oh, I think I got it. that is a general property for all group badges?

    I do not see any of them on mobile…

    wrote on last edited by
    #33

    @crazycells yes, the badges by default do not display on less than 1200px I believe (I might be wrong)

  • @crazycells yes, the badges by default do not display on less than 1200px I believe (I might be wrong)

    wrote on last edited by phenomlab
    #34

    hi @phenomlab , in this topic where the solution is chosen:

    https://sudonix.org/topic/388/the-best-css-to-customize-our-logo

    verified badge and online status are overlapping. I guess it is not intended?

  • hi @phenomlab , in this topic where the solution is chosen:

    https://sudonix.org/topic/388/the-best-css-to-customize-our-logo

    verified badge and online status are overlapping. I guess it is not intended?

    wrote on last edited by
    #35

    @crazycells hmm, I’m not seeing that. Can you provide a screenshot?

  • @crazycells hmm, I’m not seeing that. Can you provide a screenshot?

    wrote on last edited by
    #36

    @phenomlab sure, here is how I see it:

    Screen Shot 2022-11-21 at 15.49.47.png

  • @phenomlab sure, here is how I see it:

    Screen Shot 2022-11-21 at 15.49.47.png

    wrote on last edited by
    #37

    @crazycells ah, yes, I know why. There’s a class I haven’t committed.

    Thanks. I’ll sort that out tomorrow.

  • @crazycells Let’s try this

    In /forum/admin/manage/groups/verified, remove the highlighted section

    1c9e1406-d641-4e6c-8a03-e452c9462768-image.png

    We are then left with no text, but a clearer looking icon

    149c24c4-c95c-4a6e-8dc4-52340e4d0bed-image.png

    Now remove the previous CSS blocks I provided here

    Add replacement CSS

    .post-header a[href*="/forum/groups/verified"] {
        margin-right: 3px;
        margin-top: 1px;
        border-radius: 50%;
        line-height: 20px;
        display: inline-block;
        vertical-align: middle;
        text-align: center;
        overflow: hidden;
    }
    small.label.group-label.inline-block i {
        margin-top: 1px;
        margin-left: 0px;
        vertical-align: middle;
        justify-content: center;
        display: flex;
    }
    .post-header a[href*="/forum/groups/verified"] .group-label {
        min-width: 20px;
        display: flex;
        justify-content: center;
    }
    .group-label {
        vertical-align: -6px;
    }
    
    

    You should land up with something like this

    16a50d49-f765-46c9-a480-344a592baf13-image.png

    As you can see, this forces the stars out of alignment, but I don’t think this is too much of a sacrifice, and could be remediated with additional targeted CSS if need be.

    Essentially, because NodeBB doesn’t provide an id field (which would be a lot easier), we have to use wildcard CSS such as .post-header a[href*="/forum/groups/verified"] but make it targeted in the sense that it will only fire if it is part of the post stream, hence .post-header at the beginning.

    We then use .post-header a[href*="/forum/groups/verified"] .group-label to target the actual label (but only when we have a wildcard match in the CSS) meaning we can set a minimum width so that the circle doesn’t look quashed (we need to validate this on Firefox though as additional CSS might be required due to how the webkit engine will render this in contrast to mozilla).

    Finally, we use .group-label to force alignment in terms of height to prevent it wandering out of the inline-block.

    This is already active on your forum, so nothing for you to do but (hopefully) admire 🙂

    Let me know.

    wrote on last edited by cagatay
    #38

    @phenomlab said in Custom badges:

    @crazycells @DownPW something of a “fresher” approach. Have a look at the below

    5602e864-6de6-4a09-9dd1-eb33b2807774-image.png

    Using the messenger type view I created, it then becomes possible to place the “verified” group according to the style from the same view.

    This does mean some new CSS

    .self-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        right: 51px;
        top: 44px;
    }
    .topic-response-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        left: 20px;
        top: 44px;
    }
    .topic-response-post i[component="user/status"] {
        position: absolute;
        left: -1px;
    }
    

    And, more importantly, I found a more efficient way of adding classes in the messenger view js. The revised code is below

    // Target those elements already loaded in the DOM
    $(document).ready(function() {
        $(window).on('action:ajaxify.end', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    // Target elements dynamically added to the DOM on post load
    $(document).ready(function() {
        $(window).on('action:ajaxify.loaded', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    

    My style looks like it with those codes. There isjust seems some blue color of my checked icon 🙂

    ab44fb86-a985-4bbb-b6ab-284c80831859-image.png

  • cagatay cagatay referenced this topic on
  • @phenomlab said in Custom badges:

    @crazycells @DownPW something of a “fresher” approach. Have a look at the below

    5602e864-6de6-4a09-9dd1-eb33b2807774-image.png

    Using the messenger type view I created, it then becomes possible to place the “verified” group according to the style from the same view.

    This does mean some new CSS

    .self-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        right: 51px;
        top: 44px;
    }
    .topic-response-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        left: 20px;
        top: 44px;
    }
    .topic-response-post i[component="user/status"] {
        position: absolute;
        left: -1px;
    }
    

    And, more importantly, I found a more efficient way of adding classes in the messenger view js. The revised code is below

    // Target those elements already loaded in the DOM
    $(document).ready(function() {
        $(window).on('action:ajaxify.end', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    // Target elements dynamically added to the DOM on post load
    $(document).ready(function() {
        $(window).on('action:ajaxify.loaded', function(data) {
            $('li[component="post"]').each(function(i, obj) {
                if (!$(this).hasClass('self-post') || (!$(this).hasClass('self-post'))) {
                    console.log("Adding required classes for messenger type view");
                    $(this).addClass('topic-response-post');
                }
    
            });
        });
    });
    

    My style looks like it with those codes. There isjust seems some blue color of my checked icon 🙂

    ab44fb86-a985-4bbb-b6ab-284c80831859-image.png

    wrote on last edited by
    #39

    @cagatay you should remove those two CSS blocks your referenced as that’s what’s causing the odd looking blue circles over the avatar.

  • @cagatay you should remove those two CSS blocks your referenced as that’s what’s causing the odd looking blue circles over the avatar.

    wrote on last edited by
    #40

    @phenomlab which one i should remove?

  • @phenomlab which one i should remove?

    wrote on last edited by
    #41

    @cagatay These

    .self-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        right: 51px;
        top: 44px;
    }
    .topic-response-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        left: 20px;
        top: 44px;
    }
    .topic-response-post i[component="user/status"] {
        position: absolute;
        left: -1px;
    }
    
  • @cagatay These

    .self-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        right: 51px;
        top: 44px;
    }
    .topic-response-post a[href*="/groups/verified"] .group-label {
        position: absolute !important;
        left: 20px;
        top: 44px;
    }
    .topic-response-post i[component="user/status"] {
        position: absolute;
        left: -1px;
    }
    
    wrote on last edited by
    #42

    @phenomlab its not work, nothing changed when i deleted those css.

  • @phenomlab its not work, nothing changed when i deleted those css.

    wrote on last edited by
    #43

    @cagatay what isn’t working?


Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • CSS code customization for the link preview plugin

    Solved Customisation css nodebb
    6
    2
    3 Votes
    6 Posts
    3k Views
    phenomlab
    @kadir-ay-0 marking as resolved based on https://community.nodebb.org/topic/17109/manual-build-a-night-mode-for-harmony/5 Please do not raise requests in two places - here and the NodeBB forums. All this does is create unnecessary load for both parties.
  • how to hide "moved" badge with CSS?

    Solved Customisation nodebb
    12
    1
    3 Votes
    12 Posts
    4k Views
    phenomlab
    @crazycells ah, I see. That makes sense.
  • www. Infront stops website access?

    Solved Configure nodebb
    10
    1 Votes
    10 Posts
    3k Views
    phenomlab
    @Panda because there is no match for the DNS entry specified. The receiving web server parses the headers looking for a destination hostname to match, and anything the web server is unable to resolve will be sent back to the root.
  • nodebb-plugin-custom-pages

    Solved Customisation plugin custom-pages
    5
    2
    3 Votes
    5 Posts
    5k Views
    phenomlab
    @DownPW it’s possible, yes, but you may inadvertently end up targeting other elements using the same class which of course isn’t desired. Can you provide a link in DM for me to review?
  • 36 Votes
    55 Posts
    30k Views
    phenomlab
    @DownPW I see why. The code relies on the existence of [component="topic/quickreply/container"] However, this by definition means that the below has to be enabled [image: aeef638f-4188-489d-a9f2-f3a26dbca9d8-image.png] It will then work [image: 7fb38631-e0f3-46ef-b652-00929d927b13-image.png] For some unknown reason, this is hidden in Harmony, and only shows if you select it. In v2, it seems that the <section> is deleted altogether in Persona if “Quick Reply” is disabled, meaning it won’t fire as it can’t locate that specific component. The downside is that you might not want the quick reply function, but I think it’s a PITA to scroll up to the top of the post just to reply, so I have it on
  • How to downgrade plugin version on NodeBB

    Solved Customisation downgrade nodebb
    11
    3 Votes
    11 Posts
    4k Views
    phenomlab
    @cagatay no problems
  • NodeBB Footer

    Solved Customisation footer nodebb
    10
    1 Votes
    10 Posts
    4k Views
    JAC
    @phenomlab said in NodeBB Footer: @jac and you. Hope all is well and you recover quickly Thanks pal
  • nodebb dropdown menu

    Solved Configure nodebb
    5
    1
    0 Votes
    5 Posts
    3k Views
    JAC
    @phenomlab said in nodebb dropdown menu: @kurulumu-net You set it like the below example taken from this site [image: aae36790-3257-4bb2-ad5a-0d744309876a-image.png] Which presents this [image: 77f47260-2941-4afe-9614-8e17dcfc8c19-image.png] Very interesting… I actually thought this wasn’t possible, as I remember it being asked in the NodeBB forum. Is this something new that’s been implemented? I’ll 100% be doing that when I’m on the laptop over the weekend.