Skip to content

how to prevent DDoS attacks ?

Solved Vulnerability
34 2 13.5k 1
  • @phenomlab we use digital ocean, and I have checked their website before, they do not have this service, and they recommend cloudflare for this purpose.

    wrote on last edited by
    #4

    @crazycells Ok, but do they have a firewall that you can leverage? Depending on if this exists, and how advanced it is, we can use this to drop most of the unwanted traffic at the root.

  • @crazycells Ok, but do they have a firewall that you can leverage? Depending on if this exists, and how advanced it is, we can use this to drop most of the unwanted traffic at the root.

    wrote on last edited by
    #5

    @phenomlab they have firewall but we have to input individual rules, there is no country block.

    Additionally, we use UFW and we only allow https.

  • @phenomlab they have firewall but we have to input individual rules, there is no country block.

    Additionally, we use UFW and we only allow https.

    wrote on last edited by phenomlab
    #6
  • wrote on last edited by
    #7

    @phenomlab yes, we were checking here yesterday, but we have seen comments about disabled ufw after doing this… so, we have skipped it…

    additionally, we see 4-5 countries on the list… and I think the attackers are stubborn people, so the list might become longer after these settings.

  • @phenomlab they have firewall but we have to input individual rules, there is no country block.

    Additionally, we use UFW and we only allow https.

    wrote on last edited by
    #8

    @crazycells In addition, if you are using Virtualmin, you can leverage Fail2Ban which is a lot more powerful.

  • @crazycells In addition, if you are using Virtualmin, you can leverage Fail2Ban which is a lot more powerful.

    wrote on last edited by
    #9

    @phenomlab yes, we do have fail2ban set up already, sorry I wrote in the first post, but I did not write the usual way 😄 Fail2Ban

  • @phenomlab yes, we do have fail2ban set up already, sorry I wrote in the first post, but I did not write the usual way 😄 Fail2Ban

    wrote on last edited by phenomlab
    #10

    @crazycells There is also a way to do this with fail2ban using

    https://blog.reinhard.codes/2023/04/02/restricting-access-to-ssh-using-fail2ban-and-geoip/

    Obviously, you substitute port 22 (SSH) for port 443 (HTTPS)

  • @crazycells There is also a way to do this with fail2ban using

    https://blog.reinhard.codes/2023/04/02/restricting-access-to-ssh-using-fail2ban-and-geoip/

    Obviously, you substitute port 22 (SSH) for port 443 (HTTPS)

    wrote on last edited by
    #11

    @phenomlab can I ask your values of these settings?

    Screen%20Shot%202023-11-15%20at%2018.38.00.jpeg

  • @phenomlab can I ask your values of these settings?

    Screen%20Shot%202023-11-15%20at%2018.38.00.jpeg

    wrote on last edited by
    #12

    @crazycells I’d leave those as they are and handle this much further upstream (at NGINX or OS level)

  • @crazycells I’d leave those as they are and handle this much further upstream (at NGINX or OS level)

    wrote on last edited by
    #13

    @phenomlab we already have those settings changed before, so it might help if I know the default values… 😊 I guess you have them unchanged? Can I learn those default values?

  • @phenomlab we already have those settings changed before, so it might help if I know the default values… 😊 I guess you have them unchanged? Can I learn those default values?

    wrote on last edited by
    #14

    @crazycells Of course - see below

    81935872-9237-4794-8f01-b5c0a32c7c3b-image.png

  • wrote on last edited by
    #15

    maybe we should switch to aws, it has a shield for ddos protection…

    https://aws.amazon.com/shield/ddos-attack-protection/

    which provider do you think is best against ddos attacks?

  • maybe we should switch to aws, it has a shield for ddos protection…

    https://aws.amazon.com/shield/ddos-attack-protection/

    which provider do you think is best against ddos attacks?

    wrote on last edited by phenomlab
    #16

    @crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free… 🙂

    EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US 🙂

    https://www.hetzner.com/cloud

  • @crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free… 🙂

    EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US 🙂

    https://www.hetzner.com/cloud

    wrote on last edited by
    #17

    @phenomlab sure, please send me your link. we were considering aws quite some time, but I will send your link to our developer as well, so he can make decision.

    in general, we were trying to stay away from europe or european products due to strict laws and requirements. our user base is either from the US or from Turkey, so we prefer to decrease the amount of work we do 😄

  • @crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free… 🙂

    EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US 🙂

    https://www.hetzner.com/cloud

    wrote on last edited by
    #18

    @phenomlab oh I see a link there now, but I believe that is not referral link?

  • @phenomlab sure, please send me your link. we were considering aws quite some time, but I will send your link to our developer as well, so he can make decision.

    in general, we were trying to stay away from europe or european products due to strict laws and requirements. our user base is either from the US or from Turkey, so we prefer to decrease the amount of work we do 😄

    wrote on last edited by phenomlab
    #19

    @crazycells You’d be better placed with Hetzner in the US I think. AWS can get VERY expensive very quickly. My referral link for Hetzner is below.

    I personally use Hetzner and also have a “storage box” with 1Tb of storage for backups located in another datacentre for recovery purposes.

    https://hetzner.cloud/?ref=b2bBQLHF3mEV

  • wrote on last edited by
    #20

    This might also be useful…

    image.png

  • This might also be useful…

    image.png

    wrote on last edited by
    #21

    @phenomlab on a side note, is there any easy way to implement a rule… to allow only two geolocation (countries) but block the access from the rest of the countries?

  • @phenomlab on a side note, is there any easy way to implement a rule… to allow only two geolocation (countries) but block the access from the rest of the countries?

    wrote on last edited by
    #22

    @crazycells yes, but without Cloudflare you’d need to perform more checks to determine traffic origin before you have make a decision as to block or permit.

  • @crazycells yes, but without Cloudflare you’d need to perform more checks to determine traffic origin before you have make a decision as to block or permit.

    wrote on last edited by
    #23

    @phenomlab yes, we are planning to install Cloudflare again…

    We will go with “Pro” version and see how it works, I guess this should help not to have any session errors… Previously, we got many connection problems because of Cloudflare…


Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • Forum customisation

    Customisation nodebb forum customised
    11
    2
    6 Votes
    11 Posts
    3k Views
    JAC
    Thank you Mark, the changes look fantastic!!
  • NodeBB recent cards customisation

    Solved Customisation nodebb recent cards
    3
    1
    2 Votes
    3 Posts
    1k Views
    JAC
    @phenomlab thank you very much for the assistance Mark, massively appreciated as always. The great thing about this is it’s all documented for other NodeBB users that come looking for solutions . Looks far better .
  • Upgrade issues

    Solved Configure nodebb
    2
    1
    2 Votes
    2 Posts
    1k Views
    DownPW
    Use this code git fetch # Grab the latest code from the NodeBB repository git checkout v3.x git reset --hard origin/v3.x And you will have the latest version without specifying it https://docs.nodebb.org/configuring/upgrade/
  • NODEBB: Nginx error performance & High CPU

    Solved Performance performance nodebb nginx
    69
    4
    14 Votes
    69 Posts
    63k Views
    DownPW
    @phenomlab Seems to be better with some scaling fix for redis on redis.conf. I haven’t seen the message yet since the changes I made # I increase it to the value of /proc/sys/net/core/somaxconn tcp-backlog 4096 # I'm uncommenting because it can slow down Redis. Uncommented by default !!!!!!!!!!!!!!!!!!! #save 900 1 #save 300 10 #save 60 10000 If you have other Redis optimizations. I take all your advice https://severalnines.com/blog/performance-tuning-redis/
  • Changing Background on NodeBB

    Solved Customisation background image nodebb
    4
    0 Votes
    4 Posts
    2k Views
    phenomlab
    @cagatay You’d target the body tag and use the below line of CSS background: url(/assets/customcss/backgrounds/default/default.png) no-repeat center center fixed; Obviously, you need to change the path to suit where your image is being stored. More info around the background property can be found here https://www.w3schools.com/cssref/css3_pr_background.php
  • background color of the footer area

    Solved Customisation nodebb
    7
    1
    7 Votes
    7 Posts
    4k Views
    crazycells
    @phenomlab thank you very much
  • NodeBB 1.19.3

    Solved Performance nodebb 1.19.3 performance
    33
    4 Votes
    33 Posts
    16k Views
    DownPW
    @phenomlab I find the problem Mark The error message indicated this path : http://localhost:4567/assets/plugins/nodebb-plugin-emoji/emoji/styles.css?v=6983dobg16u I change the path url on config.json [image: 47bacc80-f141-41e4-a261-3f8d650cc6f6-image.png] And all it’s good Weird, I didn’t have to change that path before 1.19.3 But this does not prevent the problem from a clean install with Emoji Plugin EDIT: After test, that resolv the problem installation for 1.18.x but not for 1.19.x (I have other error message when I run ./nodebb Setup For resume: NodeJS 16_x with 1.18.x is ok
  • NodeBB Design help

    Solved Customisation
    8
    3
    2 Votes
    8 Posts
    4k Views
    phenomlab
    @riekmedia I’ve applied some new CSS to your site. Can you reload the page and try again ? For the record, this is what I added #footer { background: #2d343e; border-top: 4px solid #2d343e; font-size: 0.9em; margin-top: 70px; padding: 80px 0 0; position: relative; clear: both; bottom: 0; left: 0; right: 0; z-index: 1000; margin-left: -15px; margin-right: -338px; } The /categories page seems a bit messed up, so looking at that currently EDIT - issued some override CSS in the CATEGORIES widget <!--- CSS fix for overspill on /categories page - DO NOT DELETE --> <style> #footer { margin-right: -45px; } </style> That should resolve the /categories issue.