Skip to content

nodebb loading emojis

Solved Configure
16 2 5.7k 1
  • wrote on last edited by
    #1

    Hello

    We have a lot of custom émojis on nodebb.

    Sometines we have emojis not loading properly, sometimes they lload corretly after refresh

    I think about a problem of nginx conf maybe, or cache, or Cloudflare but i’m not sure and I don’t know with what to begin my research

    An idea about that ?

    35d5bbd5-1219-4db0-b6d9-1a50d5cf8fa8-image.png

    Thanks to communauty 😉

  • wrote on last edited by DownPW
    #13

    I delete them now and same result i nincgnito.
    –> I delete all rate config on nginx configuration and it seems to be better now. Can you test now @phenomlab ?

    but it bothers me, I would have liked to keep nginx protection against flood/ddos attacks with nodebb

    Need to find the right setting.

  • Hello

    We have a lot of custom émojis on nodebb.

    Sometines we have emojis not loading properly, sometimes they lload corretly after refresh

    I think about a problem of nginx conf maybe, or cache, or Cloudflare but i’m not sure and I don’t know with what to begin my research

    An idea about that ?

    35d5bbd5-1219-4db0-b6d9-1a50d5cf8fa8-image.png

    Thanks to communauty 😉

    wrote on last edited by
    #2

    @DownPW are you using any page rules in Cloudflare?

  • wrote on last edited by DownPW
    #3

    @phenomlab

    yep you have configured i guess but I don’t see what it’s really for

    image.png

  • wrote on last edited by
    #4

    I have test to deactivate page rules but idem.

    If you find a solution, I promess you to buy you cofee my friends lol

  • I have test to deactivate page rules but idem.

    If you find a solution, I promess you to buy you cofee my friends lol

    wrote on last edited by
    #5

    @DownPW I like a challenge 😄. I’ll take a look at this tomorrow.

  • wrote on last edited by
    #6

    @DownPW you’re getting HTTP error 429, which is a rate limit message - your IP is being restricted in terms of what it has access to from the Emoji source perspective

    image.png

  • @DownPW you’re getting HTTP error 429, which is a rate limit message - your IP is being restricted in terms of what it has access to from the Emoji source perspective

    image.png

    wrote on last edited by
    #7

    @phenomlab

    Yep I was foud that on the topic on nodeBB communauty. Error 503 It’s the same. I have add rate limit on nginx when we have ddos attack long Time ago and he seems to be better now. I have play with values

    Can you test now ?

  • @phenomlab

    Yep I was foud that on the topic on nodeBB communauty. Error 503 It’s the same. I have add rate limit on nginx when we have ddos attack long Time ago and he seems to be better now. I have play with values

    Can you test now ?

    wrote on last edited by
    #8

    @DownPW Same issue

    b013fb18-b61a-4deb-bee9-0af3d79900c8-image.png

  • wrote on last edited by DownPW
    #9

    very strange @phenomlab I haven’t got error now on the console . And now ?

    here is my nginx.conf :

    limit_req_zone $binary_remote_addr zone=flood:20m rate=100r/s; 
    
    # Connexions maximum par ip
    limit_conn_zone $binary_remote_addr zone=ddos:1m; 
    

    And my website.conf :

       # ddos - flood
       #
       client_body_timeout 5s; # Fermeture des connexions lentes
           client_header_timeout 5s; #  Fermeture des connexions lentes
           limit_conn ddos 10; 
       limit_req zone=flood burst=20 nodelay; 
       limit_req_status 429; 
       proxy_read_timeout 180; 
    
  • very strange @phenomlab I haven’t got error now on the console . And now ?

    here is my nginx.conf :

    limit_req_zone $binary_remote_addr zone=flood:20m rate=100r/s; 
    
    # Connexions maximum par ip
    limit_conn_zone $binary_remote_addr zone=ddos:1m; 
    

    And my website.conf :

       # ddos - flood
       #
       client_body_timeout 5s; # Fermeture des connexions lentes
           client_header_timeout 5s; #  Fermeture des connexions lentes
           limit_conn ddos 10; 
       limit_req zone=flood burst=20 nodelay; 
       limit_req_status 429; 
       proxy_read_timeout 180; 
    
    wrote on last edited by
    #10

    @DownPW 100% still there in incognito view

    98d827c5-13be-41c7-ad77-59ffc54e9ce5-image.png

  • wrote on last edited by
    #11

    yep I have the same on incognito view but not on normal view. Strange

  • yep I have the same on incognito view but not on normal view. Strange

    wrote on last edited by
    #12

    @DownPW Cache issue by the sounds of it. Have you cleared CF cache ?

  • wrote on last edited by DownPW
    #13

    I delete them now and same result i nincgnito.
    –> I delete all rate config on nginx configuration and it seems to be better now. Can you test now @phenomlab ?

    but it bothers me, I would have liked to keep nginx protection against flood/ddos attacks with nodebb

    Need to find the right setting.

  • I delete them now and same result i nincgnito.
    –> I delete all rate config on nginx configuration and it seems to be better now. Can you test now @phenomlab ?

    but it bothers me, I would have liked to keep nginx protection against flood/ddos attacks with nodebb

    Need to find the right setting.

    wrote on last edited by
    #14

    @DownPW Yes, working now. At a guess, I’d say your ratelimit settings in nginx.conf are too restrictive.

  • @DownPW Yes, working now. At a guess, I’d say your ratelimit settings in nginx.conf are too restrictive.

    wrote on last edited by
    #15

    @phenomlab

    If you have better values rate limit settings for nginx I take it m’y friend

  • @phenomlab

    If you have better values rate limit settings for nginx I take it m’y friend

    wrote on last edited by
    #16

    @DownPW sure. Let me have a look at this in more detail. I know nginx plus has extensive support for this, but it’s not impossible to get somewhere near acceptable with the standard version.

    You might be better off handling this at the Cloudflare level given that it sits in between the requesting client and your server.

  • DownPW DownPW has marked this topic as solved on

Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • Nodebb and emails

    Solved Configure nodebb
    27
    5 Votes
    27 Posts
    10k Views
    phenomlab
    @Panda it will use SMTP. In all cases, I never use any plugin to send email. I’ll always send it raw.
  • Collapsing blockquotes on Harmony

    General nodebb harmony collapsible quotes
    2
    1
    2 Votes
    2 Posts
    980 Views
    phenomlab
    @dave1904 that’s a really good point actually. I know it was there previously on Persona, but you’re right - no such function exists on harmony. However, putting something in place to mimick the behaviour of Persona won’t be hard from the js standpoint, although I wonder if perhaps we should ask the NodeBB developers is this feature was overlooked?
  • NodeBB: hCaptcha

    Solved Configure hcaptcha
    15
    2 Votes
    15 Posts
    4k Views
    phenomlab
    @mventures none that I know of. I don’t recall selecting these either for mine.
  • NodeBB: Upgrading to NodeBB v3.x

    Solved Configure nodebb v3.x
    6
    0 Votes
    6 Posts
    3k Views
    phenomlab
    @mventures You’d need to connect to the server and execute it directly - not on your local terminal. Review the guide below, which will show you how to gain access via SSH to your server https://docs.ovh.com/gb/en/dedicated/ssh-introduction/ Once you have access, you’ll need to navigate to the actual folder where NodeBB is installed You’ll then need to change to the directory as shown below /home/unbuntu/nodebb [image: fdffe673-bf63-4b6d-a728-5506fddc1aff-image.png] In most cases, initial access takes you to the root of the file system. You can always issue pwd in a Linux terminal which will show you the Present Working Directory. From there, you can issue the command cd /home/ubuntu/nodebb Once in the NodeBB directory, you’d use the below commands ./nodebb stop git fetch && git checkout develop && git reset --hard origin/develop ./nodebb upgrade ./nodebb start Line 1 stops the NodeBB instance Line 2 gets the latest files from GIT (repository) and then checks out the development branch. It then resets the version you are using to the development branch ready for v3 Line 3 Runs the upgrade once the new branch is set, and code pulled Line 4 Restarts the NodeBB instance after the upgrade has completed Note that when you restart NodeBB and log back in, things will look very different to what you had in v2.
  • NodeBB: Privileges for the Announcement channel

    Solved Configure nodebb
    6
    1
    1 Votes
    6 Posts
    2k Views
    phenomlab
    Up to you really
  • How to fix size of photos & videos NodeBB

    Solved Customisation nodebb nodebb size
    7
    3 Votes
    7 Posts
    3k Views
    phenomlab
    @crazycells pleasure. Using percentages makes much more sense in this case. It’s the same argument with px vs pt vs em with fonts, margins, padding, etc., in the sense that em is generally preferred over px and pt https://stackoverflow.com/questions/609517/why-em-instead-of-px
  • Title on homepage of nodebb forum

    Solved Customisation nodebb
    2
    1 Votes
    2 Posts
    2k Views
    phenomlab
    @eveh Welcome board The code you are referring to is custom written as no such functionality exists under NodeBB. However, adding the functionality is relatively trivial. Below are the required steps Navigate to /admin/appearance/customise#custom-header Add the below code to your header, and save once completed <ol id="mainbanner" class="breadcrumb"><li id="addtext">Your Title Goes Here</li></ol> Navigate to /admin/appearance/customise#custom-js and add the below code, then save $(document).ready(function() { $(window).on('action:ajaxify.end', function(data) { // Initialise mainbanner ID, but hide it from view $('#mainbanner').hide(); var pathname = window.location.pathname; if (pathname === "/") { $("#addtext").text("Your Title"); $('#mainbanner').show(); } else {} // If we want to add a title to a sub page, uncomment the below and adjust accordingly //if (pathname === "/yourpath") { //$("#addtext").text("Your Title"); //$('#mainbanner').show(); //} }); }); Navigate to /admin/appearance/customise#custom-css and add the below CSS block .breadcrumb { right: 0; margin-right: auto; text-align: center; background: #0086c4; color: #ffffff; width: 100vw; position: relative; margin-left: -50vw; left: 50%; top: 50px; position: fixed; z-index: 1020; } Note, that you will need to adjust your CSS code to suit your own site / requirements.
  • Forum not loading

    Solved Configure
    27
    0 Votes
    27 Posts
    12k Views
    JAC
    @phenomlab Brilliant!! Thanks ever so much!! Now I need to try pull in new members