Skip to content

how to prevent DDoS attacks ?

Solved Vulnerability
34 2 13.5k 1
  • @crazycells Hetzner also has excellent DDoS protection, a stateful firewall, and I have a referral link meaning you get credits for free… 🙂

    EDIT: Much of this really depends on where you want your server placed. Hetzner are based in Germany, Helsinki, and now the US 🙂

    https://www.hetzner.com/cloud

    wrote on last edited by
    #18

    @phenomlab oh I see a link there now, but I believe that is not referral link?

  • @phenomlab sure, please send me your link. we were considering aws quite some time, but I will send your link to our developer as well, so he can make decision.

    in general, we were trying to stay away from europe or european products due to strict laws and requirements. our user base is either from the US or from Turkey, so we prefer to decrease the amount of work we do 😄

    wrote on last edited by phenomlab
    #19

    @crazycells You’d be better placed with Hetzner in the US I think. AWS can get VERY expensive very quickly. My referral link for Hetzner is below.

    I personally use Hetzner and also have a “storage box” with 1Tb of storage for backups located in another datacentre for recovery purposes.

    https://hetzner.cloud/?ref=b2bBQLHF3mEV

  • wrote on last edited by
    #20

    This might also be useful…

    image.png

  • This might also be useful…

    image.png

    wrote on last edited by
    #21

    @phenomlab on a side note, is there any easy way to implement a rule… to allow only two geolocation (countries) but block the access from the rest of the countries?

  • @phenomlab on a side note, is there any easy way to implement a rule… to allow only two geolocation (countries) but block the access from the rest of the countries?

    wrote on last edited by
    #22

    @crazycells yes, but without Cloudflare you’d need to perform more checks to determine traffic origin before you have make a decision as to block or permit.

  • @crazycells yes, but without Cloudflare you’d need to perform more checks to determine traffic origin before you have make a decision as to block or permit.

    wrote on last edited by
    #23

    @phenomlab yes, we are planning to install Cloudflare again…

    We will go with “Pro” version and see how it works, I guess this should help not to have any session errors… Previously, we got many connection problems because of Cloudflare…

  • @phenomlab yes, we are planning to install Cloudflare again…

    We will go with “Pro” version and see how it works, I guess this should help not to have any session errors… Previously, we got many connection problems because of Cloudflare…

    wrote on last edited by
    #24

    @crazycells I wouldn’t be so sure. The pro version of Cloudflare is $20 per month but I don’t think that will resolve the connectivity issues.

    There also the harm that CF causes to SEO if you use their bot fight mode as I mention here

    https://sudonix.org/topic/503/cloudflare-bot-fight-mode-and-google-search

  • @crazycells I wouldn’t be so sure. The pro version of Cloudflare is $20 per month but I don’t think that will resolve the connectivity issues.

    There also the harm that CF causes to SEO if you use their bot fight mode as I mention here

    https://sudonix.org/topic/503/cloudflare-bot-fight-mode-and-google-search

    wrote on last edited by
    #25

    @phenomlab I have a good news. We set up CloudFlare Pro, and did not have connection problems yet.

    As you said, it costs $20/month if you subscribe annually, but we did monthly ($25) since we were not sure if this will work for us. So far everything looks OK. We will also check “Google Search” problem you mentioned as well after we secure our forum. Thanks a lot for this warning!

    Unfortunately, we had no choice about Cloudflare since we were getting more than 1 billion connection request from bots and forum was unusable for several hours two consecutive days…

    Screen Shot 2023-11-15 at 16.49.45.png

    Screen Shot 2023-11-18 at 13.22.28.png

    Screen Shot 2023-11-18 at 13.24.55.png

  • @phenomlab I have a good news. We set up CloudFlare Pro, and did not have connection problems yet.

    As you said, it costs $20/month if you subscribe annually, but we did monthly ($25) since we were not sure if this will work for us. So far everything looks OK. We will also check “Google Search” problem you mentioned as well after we secure our forum. Thanks a lot for this warning!

    Unfortunately, we had no choice about Cloudflare since we were getting more than 1 billion connection request from bots and forum was unusable for several hours two consecutive days…

    Screen Shot 2023-11-15 at 16.49.45.png

    Screen Shot 2023-11-18 at 13.22.28.png

    Screen Shot 2023-11-18 at 13.24.55.png

    wrote on last edited by
    #26

    @crazycells well, of course 1 billion+ requests happened after we installed CF, I do not know how many more we had before installing CF…

  • @phenomlab I have a good news. We set up CloudFlare Pro, and did not have connection problems yet.

    As you said, it costs $20/month if you subscribe annually, but we did monthly ($25) since we were not sure if this will work for us. So far everything looks OK. We will also check “Google Search” problem you mentioned as well after we secure our forum. Thanks a lot for this warning!

    Unfortunately, we had no choice about Cloudflare since we were getting more than 1 billion connection request from bots and forum was unusable for several hours two consecutive days…

    Screen Shot 2023-11-15 at 16.49.45.png

    Screen Shot 2023-11-18 at 13.22.28.png

    Screen Shot 2023-11-18 at 13.24.55.png

    wrote on last edited by
    #27

    @crazycells Good news in the short term, but interested to see if this does impact the SEO of your forum. Do you have Bot Fight Mode enabled in CF?

  • @crazycells Good news in the short term, but interested to see if this does impact the SEO of your forum. Do you have Bot Fight Mode enabled in CF?

    wrote on last edited by crazycells
    #28

    @phenomlab I actually do not know yet, because I have not found these settings on the CF yet…

    Can you please show me how I reach those?

    Screen Shot 2023-11-21 at 16.27.14.png

    and this is the bot page:

    Screen Shot 2023-11-21 at 16.29.47.png

  • @phenomlab I actually do not know yet, because I have not found these settings on the CF yet…

    Can you please show me how I reach those?

    Screen Shot 2023-11-21 at 16.27.14.png

    and this is the bot page:

    Screen Shot 2023-11-21 at 16.29.47.png

    wrote on last edited by
    #29

    @crazycells see the link located at the top right of that screenshot 😂

  • @crazycells see the link located at the top right of that screenshot 😂

    wrote on last edited by
    #30

    @phenomlab lol thanks…

    Mouxy Cotorep GIF

    is it “Verified bots”?

    Screen Shot 2023-11-21 at 16.54.43.png

  • @phenomlab lol thanks…

    Mouxy Cotorep GIF

    is it “Verified bots”?

    Screen Shot 2023-11-21 at 16.54.43.png

    wrote on last edited by
    #31

    @crazycells yes, exactly. You want to allow crawlers such as Google bot etc.

  • @crazycells yes, exactly. You want to allow crawlers such as Google bot etc.

    wrote on last edited by
    #32

    @phenomlab thanks. so, it looks like we are good for now…

    is there any other way to verify independently that indexing works ok?

  • @phenomlab thanks. so, it looks like we are good for now…

    is there any other way to verify independently that indexing works ok?

    wrote on last edited by
    #33

    @crazycells the only accurate way is to use the URL Inspection Tool

    https://support.google.com/webmasters/answer/9012289?hl=en

  • @crazycells the only accurate way is to use the URL Inspection Tool

    https://support.google.com/webmasters/answer/9012289?hl=en

    wrote on last edited by
    #34

    @phenomlab thank you very much, this was helpful. Everything looks ok 🙂

  • crazycells crazycells has marked this topic as solved on

Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • 2 Votes
    94 Posts
    25k Views
    julian@community.nodebb.org
    @willi@social.tchncs.de a VPS can be had from DigitalOcean or Vultr quite economically (although I know that isn’t always the case in some countries) You can also use our referral link for an account credit too!
  • Nodebb 3.2.0

    Bugs nodebb nodebb 3.2.0
    20
    1
    2 Votes
    20 Posts
    7k Views
    phenomlab
    @crazycells yes, I’m aware of that. Need to fix EDIT- fixed. Caused by the same CSS that is used to absolutely position the “verified” group badge in the posts view. Amended this CSS so that is specifically targets the post stream as below li[component="post"] a[href*="/groups/verified"] { position: absolute !important; left: 8px; z-index: 2; margin-top: 1px; border-radius: 999px !important; line-height: 14px; display: block; height: 22px; margin-left: 0px !important; }
  • Removing blue 'moved' tag from post

    Solved Configure nodebb
    16
    2
    3 Votes
    16 Posts
    5k Views
    Panda
    @phenomlab Ah, got it working! I reversed the CSS addition to put z index high, and then I could see another error box saying fork title must be at least 3 characters. So made the new fork title longer and button responded.
  • Composer Zen icon?

    Solved Configure nodebb
    8
    1
    2 Votes
    8 Posts
    3k Views
    phenomlab
    @DownPW exactly. Not really a new concept, and in all honesty, not something I’ve ever used. If you consider the need to add links and references, or citations, you’d need to be able to see other parts of the screen!
  • NodeBB v3 Chat Very Slow

    Moved Performance nodebb v3 nodebb chat
    47
    11 Votes
    47 Posts
    21k Views
    phenomlab
    @DownPW Seems fine.
  • adding some console.log to Nodebb

    Solved Customisation nodebb
    4
    1 Votes
    4 Posts
    2k Views
    phenomlab
    @eeeee if you’re using the console, you could try node app.js > app.log 2>&1 This would redirect stdout to a file named app.log and redirect stderr to stdout. I’m not sure about standard logging under NodeBB, but there is an error log located at logs/error.log. Failing that, you could always stop the NodeBB service then use ./nodebb dev from the console which would then provide debug output.
  • 0 Votes
    5 Posts
    2k Views
    phenomlab
    @qwinter this particular site uses the code I wrote if you want to see it in action. It’s a information and intelligence gatherer I designed for collecting various information security articles from around the globe and consolidating them in one place. Essentially, each “post” is in fact generated by the script, and the NodeBB API. https://hostrisk.com/
  • [NODEBB] Help for my custom CSS

    Solved Customisation nodebb css bugfix
    258
    49 Votes
    258 Posts
    168k Views
    cagatay
    mark hi, Refused to apply style from ‘https://efelsefe.com/assets/customfonts/FontAwesome-6-Pro/pro/css/v4-font-face.css’ because its MIME type (‘text/plain’) is not a supported stylesheet MIME type, and strict MIME checking is enabled. I keep getting this error.