Skip to content

Issues getting Flarum to work on new host

Solved Configure
65 4 29.6k 1
  • @phenomlab i have changed the domain in flarum config file to IP but it is not working, trying to install composer now

    wrote on last edited by
    #10

    @Hari checking

  • @phenomlab i have changed the domain in flarum config file to IP but it is not working, trying to install composer now

    wrote on last edited by
    #11

    @Hari It’s looking for a Redis install. Is this active ?

    [2022-02-16 11:57:15] flarum.ERROR: Predis\Connection\ConnectionException: Connection refused [tcp://127.0.0.1:6379]

  • @Hari It’s looking for a Redis install. Is this active ?

    [2022-02-16 11:57:15] flarum.ERROR: Predis\Connection\ConnectionException: Connection refused [tcp://127.0.0.1:6379]

    wrote on last edited by
    #12

    @phenomlab yes, after installing composer i am supposed to install redis

  • @phenomlab i have changed the domain in flarum config file to IP but it is not working, trying to install composer now

    wrote on last edited by phenomlab
    #13

    @Hari Did you install composer as per this guide ?

    https://getcomposer.org/download/

    Essentially, it’s this

    php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
    php -r "if (hash_file('sha384', 'composer-setup.php') === '906a84df04cea2aa72f40b5f787e49f22d4c2f19492ac310e8cba5b96ac8b64115ac402c8cd292b8a03482574915d1a8') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"
    php composer-setup.php
    php -r "unlink('composer-setup.php');"
    
  • @Hari Did you install composer as per this guide ?

    https://getcomposer.org/download/

    Essentially, it’s this

    php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
    php -r "if (hash_file('sha384', 'composer-setup.php') === '906a84df04cea2aa72f40b5f787e49f22d4c2f19492ac310e8cba5b96ac8b64115ac402c8cd292b8a03482574915d1a8') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"
    php composer-setup.php
    php -r "unlink('composer-setup.php');"
    
    wrote on last edited by
    #14

    @phenomlab yes,

    caa5c419-1e66-4c44-a62d-7b4b1ad4ff1e-image.png

  • wrote on last edited by phenomlab
    #15

    @Hari It’s not installed

    6ac11845-ecd3-47bc-8584-b4583fa6c582-image.png

    EDIT: Seems it is installed, but not correctly. You should be able to run this simply as composer. However, php composer.phar will work, but it’s clumsy to type…

  • @Hari It’s not installed

    6ac11845-ecd3-47bc-8584-b4583fa6c582-image.png

    EDIT: Seems it is installed, but not correctly. You should be able to run this simply as composer. However, php composer.phar will work, but it’s clumsy to type…

    wrote on last edited by Hari
    #16

    @phenomlab

    i followed these two guides

    php composer.phar

    https://getcomposer.org/download/
    https://getcomposer.org/doc/00-intro.md

    i think i installed it in multiple places root and public_html

    how can i fix it?

  • @phenomlab

    i followed these two guides

    php composer.phar

    https://getcomposer.org/download/
    https://getcomposer.org/doc/00-intro.md

    i think i installed it in multiple places root and public_html

    how can i fix it?

    wrote on last edited by
    #17

    @Hari Ok. Let me have a look at this for you.

  • wrote on last edited by phenomlab
    #18

    @Hari done. You should now be able to run composer directly as any user (preferably not root) inside the public_html directory.

    Essentially, it needs to be installed as php composer-setup.php --install-dir=/usr/bin --filename=composer

  • @Hari done. You should now be able to run composer directly as any user (preferably not root) inside the public_html directory.

    Essentially, it needs to be installed as php composer-setup.php --install-dir=/usr/bin --filename=composer

    wrote on last edited by
    #19

    @phenomlab sir, do i need to move any files now? or did you fix it ?

  • @phenomlab sir, do i need to move any files now? or did you fix it ?

    wrote on last edited by
    #20

    @Hari Fixed. No need to move anything. It should just “work” 🙂

  • wrote on last edited by phenomlab
    #21

    @Hari you can go ahead and use sudo apt install redis-server redis-tools to get Redis up and running now. After that, (hopefully) Flarum should boot.

  • @Hari you can go ahead and use sudo apt install redis-server redis-tools to get Redis up and running now. After that, (hopefully) Flarum should boot.

    wrote on last edited by Hari
    #22

    @phenomlab i should also setup cron jobs now searching

    a8d3cb68-e7e3-4176-aed6-33c0e2a65eda-image.png

  • @phenomlab i should also setup cron jobs now searching

    a8d3cb68-e7e3-4176-aed6-33c0e2a65eda-image.png

    wrote on last edited by phenomlab
    #23
  • wrote on last edited by Hari
    #24

    @phenomlab i have added cron job

    updated the config file but flarum is not running on IP
    when i disable redis its not loading inner pages

    c32c944d-3902-4758-85ad-425509ddac1d-image.png

  • @phenomlab i have added cron job

    updated the config file but flarum is not running on IP
    when i disable redis its not loading inner pages

    c32c944d-3902-4758-85ad-425509ddac1d-image.png

    wrote on last edited by
    #25

    @Hari That’s expected because you didn’t run sudo apt install redis-server redis-tools 🙂
    I’ve just done this, and the site now loads.

  • @Hari That’s expected because you didn’t run sudo apt install redis-server redis-tools 🙂
    I’ve just done this, and the site now loads.

    wrote on last edited by Hari
    #26

    @phenomlab i did execute that command, the inner discussion pages still not loading

    30fcfcea-fa3c-4705-96d8-b7cde08bf089-image.png

  • @phenomlab i did execute that command, the inner discussion pages still not loading

    30fcfcea-fa3c-4705-96d8-b7cde08bf089-image.png

    wrote on last edited by
    #27

    @Hari said in Issues getting Flarum to work on new host:

    i did execute that command, the inner discussion pages still not loading

    If you’d executed it, then it wouldn’t have installed when I ran it

    45402bd1-1aa2-4c63-9f2d-14e8225b7976-image.png

    @Hari said in Issues getting Flarum to work on new host:

    the inner discussion pages still not loading

    This is also expected as you haven’t included the .nginx.conf file. Hold on a second.

  • wrote on last edited by
    #28

    @Hari works now - see config below (highlighted section)

    0acbe69e-d9aa-4e72-973c-1a05ad89c0d8-image.png

  • phenomlab phenomlab referenced this topic on
  • @Hari works now - see config below (highlighted section)

    0acbe69e-d9aa-4e72-973c-1a05ad89c0d8-image.png

    wrote on last edited by
    #29

    @phenomlab is this config file?


Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • Fedora Server + Virtualmin

    Chitchat fedora server linux virtualmin
    1
    1 Votes
    1 Posts
    318 Views
    No one has replied
  • Error certification on virtualmin/Nginx

    Solved Linux cert virtualmin nginx
    17
    2
    0 Votes
    17 Posts
    7k Views
    phenomlab
    @DownPW anytime
  • MailGun Not Working NodeBB

    Solved Configure mail mailgun
    6
    1 Votes
    6 Posts
    2k Views
    cagatay
    @phenomlab did it i did not create smtp user on mailgun. everything is working now. [image: 6cc6061f-ed5d-41f6-8eb7-5d98f98b3706-image.png]
  • iFramely self host help

    Solved Configure iframely hosting
    10
    9 Votes
    10 Posts
    4k Views
    phenomlab
    @DownPW https://sudonix.com/topic/331/how-to-install-a-self-hosted-instance-of-iframely-for-use-with-nodebb
  • how to use CF tunnels with Virtualmin?

    Solved Configure cf tunnel cloudflare virtualmin
    10
    3 Votes
    10 Posts
    4k Views
    phenomlab
    @Hari DDoS protection is not just a switch, or one component. It’s a collection of different and often disparate technologies that when grouped together form the basis of a combined toolset that can be used in defence. Typically these consist of IDS (Instrusion Detection System) and IPS (Intrusion Prevention System) components that detect irregularities in network traffic, and will take decisive action based on predefined rulesets, or in the case of more modern systems, AI and ML. Traditional “traffic shaping” technology is also deployed, so if an attack cannot be easily identified as malicious, the bandwidth available to that connection is severely limited to nothing more than a trickle rather than a full flow. Years ago, ISP’s used traffic shaping (also called “policers”) as an effective means of stopping applications such as BearShare, eDonkey, Napster, and other P2P based sharing systems from functioning correctly - essentially reducing the “appeal” of distributing and seeding illegal downloads. This was essentially the ISP’s way of saying “stop what you are doing please” without actually pulling the plug. These days, DDoS attacks are designed to overwhelm - not assume control of - webservers and other public facing components. It’s rare for small entities to be attacked unless there is some form of political agenda driven by your site or product. A classic example is governmental institutions or lawmakers who effectively are classed as “enforcers” and those who disagree are effectively making a statement in the form of Denial of Service. DDoS protection is effectively the responsibility of the hosting provider, but you shouldn’t just assume that they will protect you or your site. Their responsibility stops at their infrastructure, so it’s then up to you too decide how you full the gap in between your host and the website. Typically, you’d leverage something like Imunify360 which you can get for Plesk (and something I’d strongly recommend) but it’s not free, and is a paid (not expensive per month) subscription. If you want to use VirtualMin then there are a variety of tools readily available out of the box such as firewalls and fail2ban.
  • speed up my DigitalOcean droplet - Virtualmin

    Solved Configure digitalocean virtualmin
    10
    4 Votes
    10 Posts
    3k Views
    Hari
    @phenomlab thanks for sharing, after four or five months I will migrate to DO 2 or 4gb RAM droplet.
  • VirtualMin create virtual server

    Solved Configure
    4
    2 Votes
    4 Posts
    2k Views
    phenomlab
    @justoverclock correct. You only need to keep an eye on the resources of the droplet itself
  • Virtualmin Letsencrypt Renewal

    Solved Hosting
    13
    1 Votes
    13 Posts
    6k Views
    phenomlab
    @gotwf said in Virtualmin Letsencrypt Renewal: I favor KISS engineering Then I think you’ll be able to appreciate this https://content.sudonix.com/keep-it-simple-stupid/