Skip to content

Virgin Media Broadband

Solved General
258 3 158.3k 1
  • JAC JAC

    @jac said in Virgin Media Broadband:

    @phenomlab said in Virgin Media Broadband:

    @jac yes, it’ll be fine

    Ordered 👍🏻. Hopefully tomorrow night will go a little more smoothly 😉.

    I take I do the same steps?

    Does it make more sense to use this as an extender then or as main hub?

    wrote on last edited by phenomlab

    @jac it’s going to be an access point in it’s own right. The virgin media hub is the main component and that’s not changed.

  • @jac it’s going to be an access point in it’s own right. The virgin media hub is the main component and that’s not changed.

    wrote on last edited by

    @phenomlab said in Virgin Media Broadband:

    @jac it’s going to be an access point in it’s own right. The virgin media hub is the main component and that’s not changed.

    Thanks mate, for the advice as always.

  • JAC JAC

    @jac said in Virgin Media Broadband:

    https://www.amazon.co.uk/dp/B07Z7NY23Q/ref=cm_sw_r_apan_glt_fabc_TTYWE1QQMCN1MHP418WG?_encoding=UTF8&psc=1

    Great!

    So you think this will do the job? If so I’ll go ahead and order now that I’ve started a return / refund with the faulty one.

    wrote on last edited by
  • wrote on last edited by

    About to start this… 🙏🏻🤞🏻

  • JAC JAC

    About to start this… 🙏🏻🤞🏻

    wrote on last edited by
  • wrote on last edited by JAC

    Ok mate if you’re available I may need some help for a few minutes if that’s ok?

    So I plug the cable from the virgin box into the WAN port on the new router?

    IMG_20211110_173712.jpg

  • JAC JAC

    Ok mate if you’re available I may need some help for a few minutes if that’s ok?

    So I plug the cable from the virgin box into the WAN port on the new router?

    IMG_20211110_173712.jpg

    wrote on last edited by phenomlab

    @jac No. Do the following

    1. Plug one powerline adapter into the wall next to the Virgin Hub
    2. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)
    3. Plug the remaining powerline adapter into the wall in the room where you want the router to live
    4. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the new router into the WAN port
    5. Power on the router (and powerline adapters if you haven’t already)

    Let me know when you are finished with that

  • @jac No. Do the following

    1. Plug one powerline adapter into the wall next to the Virgin Hub
    2. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)
    3. Plug the remaining powerline adapter into the wall in the room where you want the router to live
    4. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the new router into the WAN port
    5. Power on the router (and powerline adapters if you haven’t already)

    Let me know when you are finished with that

    wrote on last edited by

    @phenomlab said in Virgin Media Broadband:

    Plug the remaining powerline adapter into the wall in the room where you want the router to live

    So this doesn’t need to be downstairs with the virgin router?

  • JAC JAC

    @phenomlab said in Virgin Media Broadband:

    Plug the remaining powerline adapter into the wall in the room where you want the router to live

    So this doesn’t need to be downstairs with the virgin router?

    wrote on last edited by

    @jac No. You need one at the “Virgin End” and one at the “Router end” as I specified in the list above

  • @jac No. Do the following

    1. Plug one powerline adapter into the wall next to the Virgin Hub
    2. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)
    3. Plug the remaining powerline adapter into the wall in the room where you want the router to live
    4. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the new router into the WAN port
    5. Power on the router (and powerline adapters if you haven’t already)

    Let me know when you are finished with that

    wrote on last edited by

    @phenomlab said in Virgin Media Broadband:

    Plug one powerline adapter into the wall next to the Virgin Hub
    Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)

    Done and done ✅.

  • JAC JAC

    @phenomlab said in Virgin Media Broadband:

    Plug one powerline adapter into the wall next to the Virgin Hub
    Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)

    Done and done ✅.

    wrote on last edited by

    @jac Do you have login access to your Virgin Hub ? We need to ensure that this new router has collected a network address from the hub itself (which it should have done)

  • JAC JAC

    @phenomlab said in Virgin Media Broadband:

    Plug one powerline adapter into the wall next to the Virgin Hub
    Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)

    Done and done ✅.

    wrote on last edited by

    @jac said in Virgin Media Broadband:

    Done and done .

    Are steps 3, 4, and 5 complete ?

  • @jac No. You need one at the “Virgin End” and one at the “Router end” as I specified in the list above

    wrote on last edited by

    @phenomlab Thanks 👍🏻

  • JAC JAC

    @phenomlab Thanks 👍🏻

    wrote on last edited by

    @jac If you look at the green activity lights on the powerline adapters (in both rooms) you should see they are flashing?

  • @jac Do you have login access to your Virgin Hub ? We need to ensure that this new router has collected a network address from the hub itself (which it should have done)

    wrote on last edited by

    @phenomlab said in Virgin Media Broadband:

    @jac Do you have login access to your Virgin Hub ? We need to ensure that this new router has collected a network address from the hub itself (which it should have done)

    I think it’s on the bottom of the box mate, will check.

  • JAC JAC

    @phenomlab said in Virgin Media Broadband:

    Plug the remaining powerline adapter into the wall in the room where you want the router to live

    So this doesn’t need to be downstairs with the virgin router?

    wrote on last edited by

    @jac would this work in the next room or does it have to be in the main room?

  • JAC JAC

    @phenomlab said in Virgin Media Broadband:

    @jac Do you have login access to your Virgin Hub ? We need to ensure that this new router has collected a network address from the hub itself (which it should have done)

    I think it’s on the bottom of the box mate, will check.

    wrote on last edited by

    @jac Yes, there’s a slide-out red tag that has the details on it (provided you haven’t previously removed it)

  • JAC JAC

    @jac would this work in the next room or does it have to be in the main room?

    wrote on last edited by

    @jac said in Virgin Media Broadband:

    would this work in the next room or does it have to be in the main room?

    If you are referring to accessing the Virgin Media Hub, then it’ll work from anywhere provided you have an adequate Wifi connection

  • @jac No. Do the following

    1. Plug one powerline adapter into the wall next to the Virgin Hub
    2. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)
    3. Plug the remaining powerline adapter into the wall in the room where you want the router to live
    4. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the new router into the WAN port
    5. Power on the router (and powerline adapters if you haven’t already)

    Let me know when you are finished with that

    wrote on last edited by

    @phenomlab said in Virgin Media Broadband:

    @jac No. Do the following

    1. Plug one powerline adapter into the wall next to the Virgin Hub
    2. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the Virgin Hub (any free port)
    3. Plug the remaining powerline adapter into the wall in the room where you want the router to live
    4. Plug a network cable into the powerline adapter you just plugged in, and then plug the other end of the cable into the new router into the WAN port
    5. Power on the router (and powerline adapters if you haven’t already)

    Let me know when you are finished with that

    Done all ✅

  • @jac Yes, there’s a slide-out red tag that has the details on it (provided you haven’t previously removed it)

    wrote on last edited by

    @phenomlab said in Virgin Media Broadband:

    @jac Yes, there’s a slide-out red tag that has the details on it (provided you haven’t previously removed it)

    Thanks, do I need this right now mate?


Did this solution help you?
Did you find the suggested solution useful? Support 💗 Sudonix with a coffee ☕
If your organisation needs deeper expertise around infrastructure, security, or technology leadership, learn more about Phenomlab Ltd. Many of the deeper technical guides behind Sudonix are published there.

Related Topics
  • Cloud Storage

    General zeitkapsl europe cloud proton storage
    2
    0 Votes
    2 Posts
    901 Views
    DownPW
    For EU-based, end-to-end encrypted cloud storage, here are the strongest options beyond what you’re already using: Tresorit (Switzerland) : Probably the gold standard for E2EE. Zero-knowledge, Swiss/EU data residency, excellent for both file sync and secure sharing. More expensive than competitors but very polished and audited. Filen (Germany) : Zero-knowledge E2EE by default, generous free tier (10GB), very competitive pricing on paid plans, and lifetime plans available. Open-source clients. Popular on the privacy subreddits as a Proton Drive alternative. Internxt (Spain) : Open-source, zero-knowledge E2EE, GDPR-based. Offers storage plus a few extra privacy tools. Lifetime plans available. Younger company, so weigh that against the price. pCloud (Switzerland, registered in EU) : Massive caveat: E2EE is not default. It’s a paid add-on called “pCloud Crypto.” Without it your files are encrypted at rest but not zero-knowledge. The draw is genuine lifetime plans, which can be cost-effective over years if you trust their longevity.
  • Nodebb vs Wordpress vs Other

    General wordpress nodebb woocomerce business
    4
    5 Votes
    4 Posts
    2k Views
    DownPW
    PrestaShop + modules IA https://www.prestashop.com Magento https://developer.adobe.com/open/magento
  • Torturing My Father & Mother In Law

    General linux story kde plasma fedora
    15
    15 Votes
    15 Posts
    4k Views
    phenomlab
    @DownPW once you leave windows for Linux, you don’t ever go back.
  • Infrared the new WiFi?

    General wifi infrared
    4
    2 Votes
    4 Posts
    2k Views
    phenomlab
    @JAC those speeds are indeed possible over light as a transport medium (if you consider the speed) but I can’t comprehend the distance quoted. If you happen to encounter a solid obstacle, the beam is either absorbed, or deflected meaning the data never arrives.
  • Cloud Storage Options

    General cloud storage onedrive dropbox nextcloud others
    7
    3 Votes
    7 Posts
    3k Views
    Madchatthew
    @phenomlab I will have to test this out in my virtual environment. I have an Arch KDE Plasma install in virtualbox that I am testing a bunch of things out before I actually wipe the hard drive and install linux. I am currently in the process of copying my Arch test web server over to virtualbox on linux to make sure that it works. This is the virtual server that I test updates on before updating the production server. I can’t remember the error I was getting but I think it had to do with the network device. That was on the virtualbox side. So the cloud storage will be the next thing that I test.
  • Email Provider

    General email gmail proton
    9
    5 Votes
    9 Posts
    3k Views
    Madchatthew
    @phenomlab lol it is a great excuse and sometimes a combination of both haha
  • OKTA offering personal password manager

    General okta password manager
    31
    18 Votes
    31 Posts
    11k Views
    phenomlab
    @Madchatthew yes, works well for us.
  • Best antivirus software? (Looking to switch)

    General
    35
    19 Votes
    35 Posts
    13k Views
    Madchatthew
    @phenomlab or Challenge Accepted haha